ADT® Authorized Dealer Serving St. George & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your St. George Residence

Residents must defend against various risks like fire, flooding, and burglary. But what about something that can’t be detected by human senses? Carbon monoxide poses a unique challenge because you may never realize it’s there. Nevertheless, implementing CO detectors can effectively safeguard yourself and your household. Find out more about this dangerous gas and where to place carbon monoxide detectors in your St. George home.

What Is Carbon Monoxide?

Referred to as the silent killer due to its lack of odor, color, and taste, carbon monoxide is a common gas formed by the incomplete combustion of fuels. Any fuel-burning appliance like a furnace or fireplace may generate carbon monoxide. Even though you typically won’t have problems, issues can crop up when appliances are not routinely serviced or appropriately vented. These mistakes may result in a build-up of this dangerous gas in your residence. Generators and heaters of various types are commonly responsible for CO poisoning.

When in contact with low levels of CO, you could experience fatigue, headaches, dizziness nausea, or vomiting. Extended exposure to higher amounts could cause cardiorespiratory failure, and potentially death.

Tips For Where To Place St. George Carbon Monoxide Detectors

If you don’t own at least one carbon monoxide detector in your residence, buy one now. Ideally, you should install one on every floor, and that includes basements. Browse these tips on where to place carbon monoxide detectors in St. George:

  • Put them on each floor, specifically in places where you utilize fuel-burning appliances, such as furnaces, gas dryers, fireplaces, and water heaters.
  • You ought to always have one no more than 10 feet away from bedroom areas. If you only get one CO detector, this is where to put it.
  • Place them approximately 10 to 20 feet from potential CO producing appliances.
  • Avoid placing them immediately above or next to fuel-burning appliances, as a non-hazardous amount of carbon monoxide may be emitted when they start and set off a false alarm.
  • Attach them to walls at least five feet above the ground so they will test air where occupants are breathing it.
  • Avoid putting them near doors or windows and in dead-air places.
  • Put one in areas above attached garages.

Inspect your CO detectors often and maintain them according to manufacturer instructions. You will usually need to replace them every five to six years. You should also make certain any fuel-consuming appliances are in in good working condition and have adequate ventilation.